The following pages contain fully exploded diagrams of various gearboxes, these are for information and reference only.
|
Gearbox Transmission Case Parts |
|
|
|
|
|
|
No |
Part No |
Description |
|
1 |
18G8085 |
Gearbox Lock Tab kit |
| 2 |
GHF102 |
Gearbox Case, front block to gearbox bolt |
| 3 |
GHF101 |
Gearbox case, rear block to set screw |
| 4 |
BH604140 |
Bolt for dowel on front |
| 5 |
22H983 |
Case to block rear dowel |
| 6 |
FHS2409 |
Stud, rear stud for thin flange block |
| 6 |
FHS2410 |
Stud, rear stud for thick flange block |
| 7 |
2A3502 |
Gear change linkage bush |
| 8 |
13H577 |
Gear Change oil seal |
| 9 |
53K266 |
Stud for diff housing long 4.5", 2 only for rod change |
| 10 |
53K1471 |
Stud for diff housing, short 3.5" x .250" thread |
| 10 |
22G1834 |
Stud for diff housing, short 3" x .375" thread |
| 11 |
22A152 |
Long stud for flywheel housing |
| 12 |
53K547 |
Short stud for flywheel housing |
| 13 |
53K1474 |
Stud for speedo drive housing cover |
| 14 |
22A153 |
Dowel for diff housing |
| 15 |
22A97 |
Dowel for flywheel housing |
| 16 |
22A13 |
Dowel for speedo drive housing |
| 17 |
22A74 |
Diff housing locktab, pre rod (remote type only) |
| 17 |
42H500 |
Diff housing locktab, rod change |
| 18 |
22A251 |
Diff housing locktab |
| 19 |
2A3505 |
Upper gasket for diff housing |
| 20 |
2A3506 |
Lower gasket for diff housing, Pre-rod change |
| 20a |
22G1836 |
Lower gasket for diff housing, Rod change |
| 21 |
AHU1672 |
Gearchange oil seal, was 13H682, Rod change |
| 22 |
88G302 |
Idle gear bearing with 1.004 25.5mm O/D, 3 synchro |
| 22 |
13H7848 |
Idle gear bearing with 1.065 27.05mm O/D, 4 synchro |
| 22 |
DAM3745 |
A plus idler gear bearing 1.375 34.92mm O/D, .750" 19mm I/D |
| 22 |
AHU1707 |
A plus idler gear bearing 1.375 27.05mm O/D, .865" 22.225mm
I/D |
| 23 |
51K3565 |
Circlip 4 synchro, where 13H7848 fitted |
| 24 |
88G207 |
Speedo drive housing cover |
| 25 |
22A541 |
Gasket for housing |
| 26 |
2A3626 |
Speedo drive case plate |
| 27 |
2A3627 |
Gasket for speedo drive case plate |
| 28 |
22A335 |
Oil strainer |
| 29 |
22A341 |
Suction pipe sealing ring |
| 30 |
22A388 |
Lock tab |
| 31 |
22A1365 |
Lock tab |
| 32 |
22G1150 |
Oil Suction pipe |
| 33 |
22A542 |
Pipe to case and flange gasket |
| 34 |
2K4874 |
Lock tab |
| 35 |
TRS1317 |
Oil suction ring - case to block |
| 37 |
AED172 |
Washer for drain plug |
| 38 |
GEG502 |
Gearbox to engine gasket, was AJM502 |
| 39 |
12G2947 |
Seal (half moon) |
| 40 |
TRS1317 |
O-Ring, engine to transmission |
| |
GEG804 |
Gasket seal, all transmissions |
| |
*These pages are not a current stock list. All items are subject to availability.
